Model: 6239U3-C
- Connect power cable
- Disconnect the USB cable
- Slide the switch to the Clone position
- Insert the hard drives – the drive you want to clone or copy from is the Source and the drive you are copying to is the Target
- Turn on power
- Wait for the Orico to beep twice then press the Start button
- The hard disk progress indicator lights flash back and forth until 25% has been copied and then the first light will be solid and the other 3 lights flash back & forth until 50%
Notes
- The target disk’s capacity must be the same or larger than the source drive
- Don’t connect the USB cable while cloning
- Cloning takes roughly 90 minutes per 1TB of data SATA to SATA. SSD’s are faster
- If the target disk shows offline status after the dock is copied offline, adjust to PC mode and connected to the computer. You need to connect the computer with a USB cable, then go to the disk management and find target disk: right-click and select online
- When source disk and target disk capacity are different, you have 2 partitions, an offline partition and an unallocated partition. You need to connect the computer first, and find unallocated partition to create a simple volume, so that the target disk could be used
3.5/2.5inch 2 Bay Transparent USB3.0 Hard Drive Dock with Offline Clone Function
- Product Model: ORICO-6239U3-C
- Material: PC Material – Plastic and a PCB
- Color: White and Transparent
- Supported Specification: 2.5/3.5 inch HDD and SSD
- Output Interface: USB3.0/Type-B
- Dimension: 148*113.8*60mm
- Power Supply: 12V3A DC Barrel Jack
- Supported System: Windows/MAC/Linux
- Included Accessories: 1m USB3.0 Type-B to A Data Cable; 12V3A DC Power Adapter